Type : Manual Fitted with double plunger pump with hydraulic Pressure gauge. 0-100 KN capacity. Our own Calibration.
Specification : Strength of Concrete is a very important aspect during construction. Strength of Concrete is obtained by crushing the specimen in from of cubes or cylinders. Engineers carefully design and
specimen is tested by applying load in compression Testing Machine.
With third party calibration certificate.
Capacity: 100 Ton/150 Ton/200 Ton
Model: Digital
Type: Channel Based
Loading Unit: The hydraulic jack of is fixed to the base. The upper platen has got a self-aligning action and is attached to a screw, which passes thru the cross-head plate, and can be raised or lowered for
initial clearance adjustment. The lower platen rests on the jackram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen.
Pumping Unit: The motorized pumping unit, which is housed in an elegant console is of double plunger type and is driven by a single phase 220/440 Volts 50 cycles electric motor. The pumping unit is a separate
unit connected to the jack by means of a Rubber Hose Pipe. Ajunction box is suitable fixed to connect the motor to the mains thru a push button starter.
With third party calibration certificate.
Make : Bellstone
Model: BHI – 1105, 150 x 150 x150
PRODUCT DESCRIPTION: The moulds are manufactured from high quality cast iron. Consequently the moulds, with reasonable are, maintain their size and shape. Steel dowel pins ensure accuracy of alignment during
reassembly
BS 1881
Model : Bellstone
Model : BHI – CSC – 028
Specification:
The Apparatus consists of one slump cone with handles and foot pieces. The slump cone has internal dimensions 20 cm. dia at base 10 cm top dia and 30 mm height. Foot pieces can be fixed to the clamps on the Base plate.
Size : 12” (G.I.)- 300 mm
As per IS Standard
Size : 8” Brass- 200 mm
As per IS Standard
IS : 2386 (PART – VI) BS 812
Make: Bellstone
Model: BHI – CSC – 472
Cap.: 30 Kg.
Accuracy: 1g
Pan Size: 300x230 mm Dia
Type: SS
Type: Glass (Graduated)/ PVC
Size:
100 ML
250 ML
500 ML
1000 ML
Specification:
Sensitivity: 01 C Degree
1. Inside Aluminum Outside MS Powder Coating
3. Temp rang 0- 250 Degree
4. Thermostatic Control
5. Built in thermometer
6. Heating Elements on both sides
7. Two to three removable shelves
8. Power supply 220/230Volt A.C
Size: 12x12x12
Size: 6
Cap.: 30 Kg.
Accuracy: 1g
Pan Size: 300x230 mm Dia
Type: SS
Type: Manual
Size: 12” (200 & 300 mm)
The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction if the stop pin below the table is removed, the shaker can have a rotary
motion.
Specification
Sensitivity: 01 C Degree
1. Inside Aluminum Outside MS Powder Coating
2. Temp rang 0- 250 Degree
3. Thermostatic Control
4. Built in thermometer
5. Heating Elements on both sides
6. Two to three removable shelves
7. Power supply 220/230Volt A.C
Size: Any
Type: Manually
Model: BHI-CSC-160 (BS1881)
Complete with wooden box, our Concrete Test Hammers are easy to use. These are used for quick and approximate measurement of the resistance to pressure of manufactured concrete products. Our products work on the principles
based on the rebound impact of a hammer on a piston that rests against the surface of the concrete products.
Make: Bellstone
Model: BHI – 1086
Size: 6
Specification
Two sizes of compaction rammer are standard, 4.9 kg. operated in conjunction with a 152mm. Healthy plated steel and comprises collar, mould body and base Plate. Quick release wing nuts.
Specification
Make: Bellstone
Model: BHI – CSC – 226
The complete apparatus consists one each of small sand pouring cylinder, 3 liter capacity, Fitted with conical funnel and shutter.
Cylinder calibrating container, Internal dia 10cm and internal depth 15 cm Fitted with flange, metal tray.
Size 4”(100 mm)
Size 5” (150 mm)
Size 6” (200 mm)
Make: Bellstone
Model: BHI – CSC – 260 & 262
Specification: The unit consists of a pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge calibrated in percentage moisture content 0 – 25% X 1% on the wet weight Bellstone, a
counter poised
balance for weighing sample, a scoop for measuring carbide reagent, a bottle for through Mixing.
Specifications: It consists one each of : Cylindrical core cutter made of steel, 127.3 mm long and 100mm internal diameter. Steel Dolly, 25 mm high with a lip to enable it to be located on top of the core cutter. Rammer with detachable steel rod.
Specially design for Lab
Model: BHI -84060
Power: 450 W
Capacity: 120 Liters
Tem. Range: - 50 to 70
Accuracy: 0.1, +/-1c
Size: 105*98*22
Temperature measurement: 50°C~+300°C(-58°F~572°F)
Temperature accuracy: ±1°C/°F
Power - saving mode: 10minutes auto power off function
Power Supply: 1.5V(AG13)×1Key
Probe length: 14.6cm
Item Length: 23.5cm
Net weight: 23g
Same as above but in addition is fitted with a dash pos which facilitates gentle lovering of needles.
Salient Features
Accessories : mild steel base plate 5 inches x 5 inches. Fulcrum mould, brass, 70mm 1. 0 base dia x 60mm i. D. Top dia, 40mm height.
Used for determining the Flakiness Index of Aggregates. It Consists of a frame with a sliding panel. The Panel has slots of Different Standard Lengths and Widths accurately Cut
Power: 1500 Watt
Size: 8” Round
For determining the temperature at which a sample of bituminous material loaded by a 9.5 mm dia steel ball, drops a specified distance when heated under specified conditions.
Ring and Ball Apparatus
The new design of Ring and Ball Apparatus is compact user friendly and has better aesthetics. It has magnetic stirrer with heating facility and digital display of temperature, the heating can be adjusted through knob.
Suitable for operation on 220 V, 50 Hz, single phase, AC supply. Each unit is supplied with a bath of heat resistant glass and the following:
The apparatus consists of a Water bath with a thermostatic heater, and a circulating pump to maintain uniform water temperature. One half of the briquette moulds is fixed on a fixed plate in the water bath, the other half of
the briquette mould is fixed to a carrier which slides over a rotating threaded shaft with a clutch. The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath. A pointer fixed to
the carrier moves over a scale graduated from 0-110 cm x 1mm fixed on the bath with “0” (zero) of the scale towards the fixed plate side. The rotating shaft has 2 speeds of travel for the bracket, 5cm/min and 1 cm/min.,
selected by a clutch. Water bath inside is aluminum, it is an insulated water bath. Water bath is provided with a drain. A heater with thermostatic control is fixed inside the water bath. Control switches for motor, stirrer,
heater and indicator lamps are fixed at a convenient place on the water bath, complete with three briquette moulds and one base plate, all made of brass. Operates on 230 volts A.C. single phase.
Accessories:
1. Thermometer IP 38 C, range 23ºC to 27ºC. 2. Ductility mould with base-plate.
2. Options Ductility Apparatus with cooling options are also available.
Type: Motorised
An electronic motor and gear rotate in same as picturebut shaft. Crane is taken to prevent solvent entering into the rotor of electrical motor. Operation on 230 Volts AC Single Phase.
Accessories: 01 Filter Paper disc, 2. Benzene
Model: BHI-1025
Casegrande method and cone-penetrometer method. Soil mechanics. BS 1377, High quality of design ensure consistency of results. Satisfies international standards. Hand operated.
Size: 1Mtr x 1Mtr
Model: BHI-CSC-122
Make: Bellstone
Enables the direct measurement of liquid limit to be carried out to simply and quickly, for adjusting the cone height in relation to the specimen. This apparatus is in the measurement of the penetration of bitumen.
Laboratory C.B.R Test Apparatus is widely used in laboratories and using international standards set by the industry. It is known for its best features quick and accurate reading. This laboratory C.B.R test apparatus gives
high performance, durable and easy to operate. Laboratory C.B.R apparatus is designed using advanced technologies and uniformly constructed. It is made by our team of efficient engineers using cutting edge technology. We
offer best deals at really reasonable price in the market.
Features :
• Load Frame, Electricity cum Manually Operated 220 V, Single Phase AC Supply. 50 KN(5000 kgf) Capacity with Strain Rate of 1.25 mm per minute.
• CBR Mould with collar & base plate.
• Penetration Piston, 50 mm dia with bracket.
• Annular & Slotted Metal Weight 2.5 kg.
• Displacer Block 148 mm dia with T-Handle.
• Aluminum Tripod Stand.
• Perforated Brass Swell Plate with stem & locknut.
• Rammer 50 mm internal dia 2.6 kg kg.
• Rammer 50 mm internal dia 4.89 kg.
• Proving Ring 10 KN capacity with Our Calibration Certificate in teak wooden carrying case.
• Dial Gauge 0.01 mm x 25 mm travel.
Make: Bellstone
Capacity: 50 ml With brass Cup
Size: : 150 mm / 205 mm
